Exam Admit Card Result

Solved Question Paper / Answer Key Of Computer Operator By Himachal Pradesh Subordinate Services Selection Board Hamirpur Held on 19Th Sep 2021

Komal Sharma

Question Paper Official Answer Key Of Computer Operator

Computer Operators exam held on 19Th Sep 2021 at different examination center in Himachal Pradesh conducted by Himachal Pradesh Subordinate Services Selection Board successfully. Go through solved paper of Computer Operator Section wise and check for correct answers as per answer key provided by officials.

                    (Computer Section)

Question1: With respect to a network interface card, the term 10/100 refers to

  1. Protocol Speed
  2. A fibre speed
  3. Megabits per second
  4. None of these

Ans: C (Megabits per second)

Question2: A hard disk is divided in to tracks which are further subdivided into

  1. Clusters
  2. Sectors
  3. Vectors
  4. Heads

Ans: B (Sectors)

Question3: In laser printer techonol.gy, what happened=s during the conditioning stage?

  1. A uniform negative charge is places in the toner
  2.  A uniform negative charge is placed in the photosensitive drum
  3. The corona wire places a uniform positive charge on the paper
  4. All of these

Ans: B (A uniform negative charge is placed in the photosensitive drum)

Question4: What product is used to clean smuged keys ion a keyboard?

  1. TMC Solvent
  2. Silicone spray
  3. Denatured alcohol
  4. All- purpose cleaner

Ans: D (All-purpose cleaner )

Question5: The mouse pointer moves erratically, what is the possible cause? The mouse

  1. Ball is dirty
  2. Is not connected
  3. Driver is not installed properly
  4. Has an incorrect IRQ setting

Ans: A (Ball is dirty)

Question6: What command is used to reset a MODEM when using the “AT Command Set”?

  1. ATZ
  2. DTR
  3. ATR
  4. DCE

Ans:  A (ATZ)

Question7: In inkjet technology the droplets of ink are deflected by

  1. Multidimensional nozzles
  2. Electronically charged plates
  3. High pressure plates
  4. Electrostatic absorption

Ans: A (Multidimensional nozzles)

Question8: Which provides the fastest access to large video files?

  1. EIDE hard drives
  2. SCSI hard drives
  3. IDE hard drives
  4. Optical drives

Ans: B (SCSI hard drives)

Question9: RS-232 is a standard that applies to

  1. Serial ports
  2. Parallel ports
  3. Game ports
  4. Networks

Ans: A (Serial ports)

Question10: Which helps prevent power surges?

  1. Surge suppressor
  2. Spike Protector
  3. UPS System
  4. High grade multi-metre

Ans: A (Surge suppressor)

Question11: When is the risk for electrostatic discharge the greatest?

  1. Day time
  2. High Humidity
  3. Low Humidity
  4. Night Time

Ans: C (Low humidity)

Question12: What is the common language that computers use to talk with one another on a network?

  1. Client
  2. Adapter
  3. Protocol
  4. Operating system

Ans: C (Protocol)

Question13: In MS-DOS, what command you will use to display system date?

  1. Date command
  2. Ver command
  3. Disk Command
  4. Format command

Ans: A (Date Command)

Question14: Maximum length of DOS command using any optional parameter is

  1. 26 characters
  2. 87 characters
  3. 127 characters
  4. None of these

Ans: C (127 characters)

Question15: In Unix, which command is used to remove a file?

  1. Remove
  2. Rm
  3. Mv
  4. Del

Ans: D (del)

Question16: The agency thar sits between the user and the UNIX system is called the

  1. Logic
  2. Profile
  3. Shell
  4. None of these

Ans: C (Shell)

Question17: What TCP/IP protocol is used to remote termi9nal connection service?

  1. UDP
  2. RARP
  3. FTP
  4. TELNET

Ans: D (TELNET)

Question18: Which command is used to create a Linux installation hoot floppy?

  1. Mkboot disk
  2. Bootfp disk
  3. Ww and rawwrite
  4. Dd and rewrite

Ans: D (dd and rewrite)

Question19: What command do you use to create Linux file systems?

  1. Fdisk
  2. Mkfs
  3. Fsck
  4. Mount

Ans: B (mkfs)

Question20: Which layers of the OSI model are managed by a network protocol such as Mcrosoft NetBEUI?

  1. Network and transport
  2. Physical and data link
  3. Transport and session
  4. None of these

Ans: A (Network and transport)

Question21: A trust relationship

  1. Is created using server manager for domains
  2. Is an administrative and communication link created between two windows NT server domains
  3. Can be created between windows NT W/s computers
  4. None of these

Ans: B

Question22: What is the term used for describing the judgemental or commonsense part of problem solving?

  1. Heuristic
  2. Critical
  3. Value based
  4. Analytical

Ans: A (Heuristic)

Question23: Visual clues that are helpful in computer vision include

  1. Colour and motion
  2. Depth and texture
  3. Height and weight
  4. Both A and B

Ans: D (Both A and B)

Question24: If a reboot can alter its own trajectory in response to external conditions, it is considered to be

  1. Intelligent
  2. Mobile
  3. Open loop
  4. non-servo

Ans: A (Intelligent)

Question25: An artificial intelligence technique that allows computers to understand associations and relationships between objects and events is called

  1. Heuristic processing
  2. Cognitive science
  3. Relative symbolism
  4. Pattern matching

Ans: D (Pattern Matching)

Question26: What is the name of the computer program that simulates the thought processes of human beings?

  1. Human logic
  2. Expert system
  3. Personal information
  4. None of these

Ans: B (Expert system)

Question27: A report generator is used to

  1. Update files
  2. Print files on paper
  3. Data entry
  4. All of these

Ans: B (Print files on paper)

Question28: What is not a logical database structure?

  1. Tree
  2. Relational
  3. Network
  4. Chain

Ans: D (Chain)

Question29: Which languages is used by most of the DBMSs for helping their users to access data?

  1. SQL
  2. Query language
  3. High level language
  4. 4GL

Ans: B (query language)

Question30; A tuple is equivalent to a

  1. Record
  2. Field
  3. File
  4. Database

Ans: A (record)

Question31: A top-to-bottom relationship among the items in a database is established by a

  1. Relational schema
  2. Network schema
  3. Hierarchical schema
  4. All of these

Ans: C (Hierarchical Schema)

Question32: The language used in application programs to request data from the DBMS is refferedti as the

  1. DML
  2. DDL
  3. Query language
  4. All of these

Ans: A (DML)

Question33: An audit trial

  1. Is used to make back-up copies
  2. Is the recorded history of operations performed on a file
  3. Can be used to restore lost information
  4. All of these

Ans: B (Is the recorded history of operations performed on a file)

Question34: Controls of data communication deal with

  1. The communication channel
  2. The computer
  3. Terminals
  4. All of these

Ans: D (All of these)

Question35: Which is not an important principle for evaluating the raw data for decision making?

  1. Selection
  2. Pattern
  3. Average
  4. Overview

Ans: C (Average)

Question36: the analysis and design of application system are the responsibility of a

  1. Computer operator
  2. Programmer
  3. System Analyst
  4. Data Entry operator

Ans: C (System Analyst)

Question37: Which is a brief message to an operator that describes what data are to be entered?

  1. Prompt
  2. Passwords
  3.  MIS
  4.  Tactical

Ans: A (Prompt)

Question38: Data has to be ………. Before it can be converted into information.

  1. Processed
  2. Transformed
  3. Changed
  4. Engineered

Ans: A (Processed)

Question39: Encryption is being used primarily with

  1. File retention
  2. Transaction entry
  3. Computer processing
  4. Data communication

Ans: D (Data Communication)

Question40: A key verifier machine is used in controlling

  1. Transaction entry
  2. Data communication
  3. Computer processing
  4. None of these

Ans: A (transaction entry)

Question41: The primary tool used in structured design is a

  1. Structure chart
  2. Data flow diagram
  3. Program flowchart
  4. Module

Ans: A (Structure chart)

Question42: In prototyping

  1. BASIC is used
  2. COBOL is used
  3. 4GLs are used
  4. System is documented

Ans: C (4GLs are used)

Question43: Data Definition Language(DDL)

  1. Describes how data are structured in the database
  2. Specifies for the DBMS what is required; the technique used to process data
  3. Determine how data must be structured to produce the user’s view
  4. All of these

Ans: A (Describes how data are structured in the database)

Question44: Problem analysis is done during

  1. system design phase
  2. System analysis phase
  3. Before system test
  4. All of these

Ans: B (System analysis phase)

Question45: Top-down programming is

  1. A group of related fields
  2. A map of the programmer’s view of data
  3. An approach in which the top module is first tested then program modules are added from the highest level to the lowest level
  4. None of these

Ans: C (An approach in which the top module is first tested then program modules are added from the highest level to the lowest level)

Question46: which is not a tool for Application prototyping?

  1. Application generators
  2. Third generation language
  3. Screen generators
  4. Report generators

Ans: B (Third generation language)

Question47: An example of a hierarchical data structure is

  1. Array
  2. Link list
  3. Tree
  4. All of these

Ans: C (Tree)

Question48: Which symbol is used in a flow chart to represent a calculation task?

  1. Input
  2. Output
  3. process
  4. start

Ans; C (Process)

Question49: Structured programming involves

  1. decentralisation of program activity
  2. functional modularisation
  3. localisation of errors
  4. all of these

Ans: B (Functional modularisation)

Question50: Which is not considered as tool at the system design phase?

  1. Pie chart
  2. Data flow diagram
  3. Decision table
  4. Systems flow chart

Ans: A (pie chart)

Question51: RAM is also called as

  1. Virtual memory
  2. Volatile memory
  3. Non-volatile memory
  4. Cache memory

Ans: B (Volatile Memory)

Question52: Cache memory acts between

  1. CPU and RAM
  2. RAM and ROM
  3. CPU and Hard disk
  4. All of these

Ans: A (CPU and RAM)

Question53: A program used to detect overall system malfunction is

  1. System diagnostics
  2. Utilities
  3. System analysis
  4. System software

Ans: A (System diagnostics)

Question54: an adder in which the bits id the operands are added one after another is

  1. Serial adder
  2. Half adder
  3. Full adder
  4. None of these

Ans: A (Serial adder)

Question 55: The time taken for the read/write head to move to the correct track on the magnetic disk is called

  1. Ap0proach time
  2. Seek time
  3. Epoch delay
  4. Latency delay

Ans: B (Seek time)

Question56: A programme language

  1. Is never machine dependent
  2. Is always machine dependent
  3. Defines the form of the instruction
  4. All of these

Ans: C (Defines the form if the instruction)

Question57: What key hardware item ties a CAD/CAM system together?

  1. Mouse
  2. Graphics workstation
  3. Digitizer
  4. Plotter

Ans: B (Graphics workstation)

Question58: What is a graphical input devices?

  1. Light pen
  2. Track ball
  3. Mouse
  4. Keyboard

Ans: A (Light pen)

Question59: The two major categories of software are: Application software and

  1. UNIX Software
  2. High-level language
  3. CAD software
  4. System software

Ans: D (system software)

Question60: Which produces the best quality graphics reproduction?

  1. Dot matrix printers
  2. Ink jet printers
  3. Laser printers
  4. Plotters

Ans:  D(Plotters)

Question61: The user communicates directly with the computer through its peripheral devices is known as

  1. On-line processing
  2. Remote terminal processing
  3. Batch mode processing
  4. Intelligent terminal processing

Ans: A (On line processing)

Question62: The electric component that has been the key to recent developments in automation is the

  1. Transistors
  2. Diode
  3. Integrated circuit
  4. Improved vacuum tube

Ans: C (Integrated circuit)

Question63: Which is considered a high level language?

  1. FORTRAN
  2. Machine language
  3. Assembly language
  4. All of these

Ans: A (FORTRAN)

Question64: actuators are used to

  1. Sense an object
  2. Make a mechanical movement
  3. Activate a chemical
  4. All of these

Ans: B (make a mechanical movement)

Question65: An OR gate can be imagined as

  1. Switches connected in series
  2. Switches connected in parallel
  3. MOS transistors connected in series
  4. All of these

Ans: B (Switches connected in parallel)

Question66: Conversion of binary number (101101) to hexadecimal is

  1. 37
  2. 2D
  3. 2E
  4. 27

Ans: B (2D)

Question67: what logic function is produces by adding an  inverter to each input and the output of an AND gate?

  1. NAND
  2. NOR
  3. OR
  4. XOR

Ans: C (OR)

Question68: Flip-Flop outputs are always

  1. The same
  2. Independent of each other
  3. Same as inputs
  4. Complimentary

Ans: D (Complementary)

Question69: The ASCII

  1. Is a subset of 8-bit EBCDIC
  2. Is used only in western countries
  3. Has 128 characters, including 32 control characters
  4. None of these

Ans: C ( has 128 characters, including 32 control characters)

Question70: the Gray code for decimal 7 is

  1. 111
  2. 1011
  3. 100
  4. 101

Ans: C (100)

Question71: A bus is a group of …. Carrying digital signals

  1. Wires
  2. Gates
  3. Transistors
  4. Registers

Ans: A (Wires)

Quesstion72: Which logic families has the highest noise immunity?

  1. RTL
  2. DTL
  3. TTL
  4. HTL

Ans: D (HTL)

Question73: A self-relocating program is one which

  1. Cannot be made to execute in any area of storage other than the one designated for it at the time if its coding or translation
  2. Consists of a program and relevant information for its relocation
  3. Can itself perform the relocation of its relocation of its address sensitive portions
  4. All of these

Ans: C(Can itself perform the relocation of its relocation of its address sensitive portions)

Question74: A compiler for a high level language that runs on one machine and produces code for a different machine is called

  1. Optimizing compiler
  2. One pass compiler
  3. Cross compiler
  4. None of these

Ans: C (cross compiler)

Question75: Multiprogramming was made possible by

  1. Input/output units that operate independently of the CPU
  2. Operating systems
  3. Both A and B
  4. None of these

Ans: C (both A and B)

Question76: which program is not utility?

  1. Debugger
  2. Editor
  3. Spooler
  4. All of these

Ans: C (spooler)

Question77: Bug means

  1. A logical error in a program
  2. A difficult syntax error in a program
  3. Documenting programs using an efficient documentation tool
  4. All of these

Ans: A   ( a logical error in a program)

Question78: an algorithm is best described as

  1. A computer language
  2. A step by step  procedure for solving a problem
  3. A branch of mathematics
  4. All of these

Ans: B ( A step by step procedure for solving a problem)

Question79: the name of the location of a particular piece of data is its

  1. Address
  2. Memory name
  3. Storage sites
  4. Data location

Ans: A (Address)

Question80: Remote processing and time sharing was introduced in which generation of computers?

  1. First
  2. Second
  3. Third
  4. Fourth

Ans: D (Fourth)

Question81: To go to the beginning of a text line press

  1. Home
  2. Page up
  3. Enter
  4. None of these

Ans: A (Home)

Question82: The most frequently used piece of hardware for inputting data is the]\

  1. Keyboard
  2. Floppy disk
  3. Cursor
  4. Software

Ans: A (Keyboard)

Question83: Built in memory of computer is

  1. EROM
  2. ROM
  3. RAM
  4. PROM

Ans: B (ROM)

Question84: What type if device is a floppy drive?

  1. Input
  2. Output
  3. Software
  4. Storage

Ans: D (storage)

Question85: Main circuit board of computer is called

  1. Father board
  2. Mother board
  3. Keyboard
  4. All of these

Ans: B (mother board)

Question86: series of eight bits is called

  1. Bit
  2. Byte
  3. Number
  4. Kilobyte

Ans: B (byte)

Question87: to work on a computer mainly, we need

  1. Hardware
  2. Software
  3. Scanner
  4. Both A and B

Ans: D (both A and B)

Question88: Oracle is a

  1. An operating system
  2. Word processor
  3. Database software
  4. Al of these

Ans: C (Database software)

Question89: In which topology, network components are connect5ed by only one cable?

  1. Star
  2. Ring]
  3. Bus
  4. Mesh

Ans: C (Bus)

Question90: Which devices are used to transmit data over telecommunication lines?

  1. Drives
  2. drive bays
  3. Modems
  4. Platform

Ans: C (Modems)

Question91: Which software program is used to view web pages?

  1. Site
  2. Host
  3. Link
  4. Browser

Ans: D(browser)

Question92: If your computer keeps rebooting itself, then it is likely that

  1. It has a virus
  2. It does not have enough memory
  3. There is no printer
  4. There has been a power surge

Ans: A (it has a virus)

Question93: which of the following tell us about used and free space available in a computer?

  1. My computer
  2. My document
  3. My briefcase
  4. My search

Ans: A (My computer)

Question94: In Ms  windows, text and graphics that have been cut or copied are stored in an area called the

  1. paste board
  2. Copy board
  3. Clipboard
  4. Cutting board

Ans: C (Clipboard)

Question95: A symbol on the screen that represents a disk, document or program that you can select is called

  1. Keys
  2. Icon
  3. Caps
  4. Monitor

Ans: B (Icon)

Question96: in which year slide rule was developed?

  1. 1694
  2. 1801
  3. 1627
  4. 1620

Ans: D (1620)

Question97: a type of instruction that can be produce several lines of machine language cade is a

  1. mnemonic
  2. Address
  3. Macro
  4. Assemble

Ans; C (macro)

Question98: whereas a computer mouse moves over the table of machine language code is a

  1. Stationery
  2. Difficult to move
  3. Dragged
  4. Moved in small steps

Ans: A (stationery)

Question99: Primary memory is divided into how many parts?

  1. Two
  2. Four
  3. Six
  4. Eight

Ans: A (two)

Question100: octal numbers are used

  1. When binary numbers are too long
  2. In computer hardware
  3. Internal to the computer
  4. None of these

Ans: A (when binary numbers are too long)

Question101: the system, software is installed on your computer, when you install the

  1. Antivirus
  2. Operating system
  3. Device drivers
  4. All of these

Ans: D (all of these)

Question102: All the time a computer is switched ON, its operating system software has to stay in

  1. Main storage
  2. Primary storage
  3. Floppy disk
  4. Disk drive

Ans: B (primary storage)

Question103: Various applications and documents are represented on the windows desktop by

  1. Icons
  2. Graphs
  3. Labels
  4. Symbols

Ans: A (Icons)

Question104: In MS-Word, a major step before taking print of the documentis

  1. To save the document
  2. To set paper settings
  3. To see print view of document
  4. Both B and C

Ans: D (both B and C)

Question105: which program can be used to keep track calculation of marks given for homework and recording exam results and also for registers, etc.?

  1. MS-Word
  2. Power point
  3. E-Mail
  4. Electronic spreadsheet

Ans: D (Electronic spreadsheet)

 Question106: In MS-Excel, getting data from a cell located in a different sheet is called

  1. Accessing
  2. Referencing
  3. Updating
  4. Functioning

Ans: A (accessing)

Question107: To spell check in power point you have to go to which tab?

  1. Insert
  2. Review
  3. View
  4. Home

Ans: B (Review)

Question108: How can you get your photo album in slide show to play continuously?

  1. Use random slide transition
  2. Launch an online broadcast
  3. Use loop continuously
  4. All of these

Ans: C (use loop continuously)

Question109: It is better to use files than a DBMS when there is/are

  1. Stringent real time requirements
  2. Multiple users wish to access the data
  3. Complex relationship among data
  4. All of these

Ans: B (multiple users wish to access the data)

Question110: In MS-Access, a subset of characters within a data field is known as

  1. Record
  2. File
  3. Data string
  4. Byte

Ans: C (Data string)

Question111: Several computers linked to a server to share programs and storage space in

  1. Network
  2. Library
  3. Grouping
  4. Integrated system

Ans: A (network)

Question112: IP addresses are converted to

  1. A binary string
  2. Alphanumeric string
  3. A hierarchy of domain names
  4. A hexadecimal string

Ans: C (a hierarchy of domain names)

Question113: A search engine is a program to search

  1. For information
  2. Web pages
  3. Web pages for specified index terms
  4. Web pages for information using specified search terms

Ans: D (web pages for information using specified search terms)

Question114: the code segment that misuses its environment is called a

  1. Internal thief
  2. Trojan horse
  3. Code stacker
  4. All of these

Ans: B (Trojan horse)

Question115: A combinational logic circuit that is used when it is desired to send data from two or more source through a single transmission line is known as

  1. Decoder
  2. Encoder
  3. Multiplexer
  4. Demultiplexer

Ans: C (Multiplexer)

Question116: Which is the most important feature of spiral model?

  1. Quality management
  2. Risk management
  3. Performance management
  4. Efficiency management

Ans: B (Risk management)

Question117: the mechanism by which the data and functions are bound together with an object definition

  1. Inheritance
  2. Encapsulation
  3. Abstraction
  4. None of these

Ans: B (Encapsulation)

Question118: Which operation can be performed on data structures?

 Ans; D (All of these)

Question119: Where can you find the horizontal split bar on MS-Word screen?

  1. On the left of horizontal scroll bar
  2. On the right of horizontal scroll bar
  3. On the top of vertical scroll bar
  4. On the bottom of vertical scroll bar

Ans: C (On the top of vertical scroll bar)

Question120: To save a document for the first time which option is used?

  1. Save as
  2. Save first
  3. Save on
  4. Copy

Ans: A (Save as)

                                                                           (HP GK Section)

Question1: Percentage of Urban population of Himachal Pradesh to its total population as per census 2011 is

  1. 9.8%
  2. 10.03%
  3. 11.2%
  4. 12.4%

Ans: B (10.3%)

Question2: Sex ratio of Himachal Pradesh was as per census 2011 is

  1. 972
  2. 976
  3. 982
  4. 992

Ans; A (972)

Question3: Seer Khad is located in which district of Himachal Pradesh?

  1. Bilaspur
  2. Hamirpur
  3. Una
  4. Kullu

Ans: A (Bilaspur)

Question4: Minjar fair is celebrated at which place in Himachal Pradesh?

  1. Kangra
  2. Chamba
  3. Mandi
  4. ShimlA

Ans: B (Chamba)

Question5: Hamir festival is celebrated at which place in Himachal Pradesh?

  1. Sirmour
  2. Solan
  3. Kinnaur
  4. None of these

Ans: D (None of these)

Question6:Binwa is tributary of which river of Himachal Pradesh?

  1. Beas
  2. Yamuna
  3. Chamba
  4. Satlej

Ans: A (beas)

Question7: nako lake is located in which district of Himachal Pradesh?

  1. Kinnaur
  2. Lahaul-spiti
  3. Chamba
  4. Shimla

Ans: A (Kinnaur)

Question8:The founder of Guler princely state of Himachal Pradesh?

  1. Datar chand
  2. Hari chand
  3. Jai chand
  4. Vir chand

Ans: B (Hari chand)

Question9: The capital of nurpur princely state was located at which place in Himachal Pradesh?

  1. Pathankot
  2. Nagar
  3. Basantpur
  4. Halog

Ans: A (Pathankot)

Question10: the old name of bharmour was

  1. Biaspur
  2. Brahmpur
  3. Kirgram
  4. Deorha

Ans: B (brahmpur)

Question11: Which place of Himachal Pradesh is popularity known as ‘Peach Bowl of Asia’?

  1. Nalagarh
  2. Naldehra
  3. Sujanpur
  4. Rajgarh

Ans: D (Rajgarh)

Question12: Chamba sewak sangh was founded in which year?

  1. 1936 AD
  2. 1942AD
  3. 1945AD
  4. 1947AD

Ans: A (1936AD)

Question13: Himurja hydropower projects work under which agency?

  1. HPSEB
  2. NHPC
  3. NTPC
  4. BBMB

Ans: A (HPSEB)

Question14: Army Training command is located at which place in Himachal Pradesh?

  1. Sujanpur
  2. Dakshai
  3. Kasauli
  4. Shimla

Ans: D (Shimla)

Question15: Jangi Monestry is located at which place in Himachal Pradesh?

  1. Oachhghat
  2. Kaza
  3. Kalpa
  4. Recongpeo

Ans: D (Recongpeo)

                                                            (Reasoning Section)

Question1: In a certain language ‘MOTHERS’ is written as ‘OMVGGPU’. How is ‘BROUGHT’ written in that code?

  1. CPRTIEV
  2. DPQSIFV
  3. DPRTIDV
  4. DPQTIFV

Ans: D (DPQTIFV)

Questioin2: If Raju finds that he is 12th from the right in a row of boys and 4th from the left, how many boys should be added to the row such that there are 28 boys in the row?

  1. 11
  2. 12
  3. 13
  4. 14

Ans: C (13)

Question3: Pointing to a woman in a photograph a man says: “she is the grandmother of the son of my daughter-in-law’s mother-in law”. How is the woman related to the man?

  1. Mother
  2. Mother-in -law
  3. Sister
  4. Wife

Ans: A (Mother)

Question4: From his house, Lokesh went 15 kms to the North. Then he turned west and covered 10 kms. Then, he turned south and covered 5 kms. Finally, turning to east, he covered 10 kms. In which direction is he from his house?

  1. East
  2. West
  3. North
  4. South

Ans: C (North)

                                             (India gk , Current affairs and general science)

Question1: Which organisation is associated with waving intellectual property protection for COVID-19 vaccines?

  1. WHO
  2. UNICEF
  3. WTO
  4. FAO

Ans: C (WTO)

Question2: A new spices of duck-billed dinosaur, yamatosaurus Izannagii has been recently discovered in which country?

  1. China
  2. Greece
  3. Japan
  4. Indonesia

Ans: C (Japan)

Question3: As per the recent report released by the S and P global ratings, what is the growth forecast of India in 2021/

  1. 6 percent
  2. 8 percent
  3. 10 percent
  4. 11 percent

Ans: D (11 percent)

Question4: The blood pressure is the pressure of blood in

  1. Arteries
  2. Veins
  3. Auricles
  4. Ventricles

Ans: A (arteries)

Question5: pea plant is a/an

  1. Shrub
  2. Herb
  3. Tree
  4. Orchid

Ans: B (herb)

Question6: Who invented X-ray?

  1. Rutherford
  2. Roentgen
  3. Einstein
  4. Baird

Ans: B (Roentgen)

Question7: Which metal is stored in kerosene oil?

  1. Zinc
  2. Silver
  3. Sodium
  4. Gold

Ans: C (Sodium)

Question8: The gayatri mantra is dedicated to which deity?

  1. Agni
  2. Marut
  3. Surya
  4. Savitri

Ans: D (Savitri)

Question8: Ashoka is convened the Third Buddhist council at

  1. Kapilvastu
  2. Pataliputra
  3. Rajagriha
  4. Kushinagar

Ans: B (Pataliputra)

Question9: The author of sri bhashya is

  1. Kabir
  2. Sankara
  3. Ramanuja
  4. Nanak

Ans: C (Ramanuja)

Question10: The sikh guru who killed by the orders of Aurangzeb was

  1. Guru ram das
  2. Guru arjun dev
  3. Guru teg bahadur
  4. Guru gobind singh

Ans: C (Guru Teg Bahadur)

Question11: The East India company received the Zamindari of the 24 Paraganas from

  1. Mir Qasim
  2. Siraj-Ud-Daula
  3. Chanda sahib
  4. Mir Jafar

Ans: C (Chanda Sahib)

Question12: Who was the first Muslim ruler to conquer South India?

  1. Alauddin Khilji
  2. Mahammad Ghori
  3. Babar
  4. Aurangzeb

Ans: A (Alauddin Khilji)

Question 13: Satyagraha Ashram was established by

  1. Mahatma Gandhi
  2. Acharya Kriplani
  3. J.P. Narayan
  4. Vinoba Bhave

Ans: A (mahatma Gandhi)

Question 14: Lotteries organised by the government of a state come under

  1. Union list
  2. State list
  3. Concurrent list
  4. None of these

Ans: B (State List)

Question15: The number of members of the constituent assembly representing the princely Indian states was

  1. 60
  2. 70
  3. 80
  4. 90

Ans: B (70)

Question16: The supreme court was set up under

  1. Pitt’s India act
  2. Regulating act
  3. Indian councils act,1861 AD
  4. India council act, 1892AD

Ans: B (Regulating Act)

Question17: globalisation refers to the unrestricted and unfettered movement of

  1. Capital
  2. Technology
  3. Goods
  4. All of these

Ans; D (all of these)

Question18: The solar corona mainly consists of

  1. Molten lava
  2. Cosmic rays
  3. Gases
  4. Ice

Ans: A (Molten Lava)

Question19: The layer of the  atmosphere which provides ideal conditions for flying of jet aeroplanes

  1. Troposphere
  2. Stratosphere
  3. Ionosphere
  4. Exosphere

Ans: B (stratosphere)

Question20: The 25th state in India was

  1. Sikkim
  2. Nagaland
  3. Goa
  4. Mizoram

Ans: C (Goa)

Question21: Salal Hydroelectric project is located in which Indian state/Union territory?

  1. Punjab
  2. Odisha
  3. J&K
  4. Karnataka

Ans: C (J&K)

Question22: India is the largest producer and exporter of

  1. Manganese
  2. Bauxite
  3. Copper
  4. Mica

Ans: D (Mica)

                                                            (English Part)

Question1: Antonym of ‘Aromatic’ is

  1. Tart
  2. Disagreeable
  3. Soul
  4. Odorous

Ans: D (odorous)

Question2: one word substitution for-A person who rules without consulting the opinion of others

  1. Democrat
  2. Bureaucrat
  3. Autocrat
  4. Fanatic

Ans; C (Autocrat)

Question3: the teacher promised to …….. a prize to the boy who stood first in the class.

  1. Reward
  2. Award
  3. Promote
  4. Secure

Ans: B (award)

Question4: meaning of the idiom-to get into scrap

  1. To get into a muddle
  2. To find o0neself in an awkward predicament
  3. To get into irritating circumstances
  4. To be trapped in a conspiracy

Ans: B (To find oneself in an awkward predicament)

Official Answer Key Of Computer Operator

With the help of these question answer you can also verify your score or can also prepare for next exam which is conducted by HPSSSB Hamirpur or conducted by other officials.

Exit mobile version